PRODUCTS FOR SWIMMING POOLS, products which will ensure the quality of the water at the best operation parameters, in full safety conditions, so that the use of the swimming pool will become a real pleasure. They can be used both for small and large swimming pools.

Products for the swimming pool cleaning.

They are products used to clean the surface of the swimming pool (walls and bottom) when it is emptied in order to change the water.

DEGREASER - Edirom Pool

 
PRESENTATION

DEGREASER - is a synergic mixture in the liquid form based on surfactants, surface-active substances and other active components with well determined functions in the action of degreasing of the swimming pool surfaces.

DEGREASER - removes easily even the most resistant traces of oils, fats and vegetal or animal proteins from the walls of the swimming pool and leaves a clean surface, free from fats or spots.

It is soluble in the water, no unpleasant smells occur, it is biologically biodegradable.

Because of the combination of specially designed active substances, a suitable cleaning level is quickly reached.

USE FIELDS
  • It is used immediately after the swimming pool has been emptied so that the surface be wetted. If it is to be used on dry surfaces, the surface will be wetted by plenty of water.
  • Se prepar A 5%÷10% solution is prepared (500 ml to 5÷10 liters of water which is homogenized well).
  • For cleaning, a normal brush is soaked in the product, then it is applied on the walls and on the bottom of the swimming pool. In the areas with large or resistant stains the surface will be scrubbed.
  • After cleaning, the walls and the bottom of the pool will be washed with water jet with the emptying pump in operation in order to evacuate the water to the sewage system.
  • If there are still stains, it is recommended to repeat the cleaning process.
  • Thereafter, in order to remove the limestone crusts, rust stains or other kinds of deposits, the product CRUST-CLEAN - will be used.
  • The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.


CRUST-CLEAN - Edirom Pool

 
PRESENTATION

CRUST-CLEAN - is a synergic mixture in liquid form based on inorganic and organic acids, surfactants and other active components with well determined functions in the action of elimination of the crusts built up on the surface of the swimming pools.


USE FIELDS

CRUST-CLEAN - removes easily the limestone deposits in the crust form and the stains of rust from the walls of the swimming pool and leaves a clean surface.

It is recommended for swimming pools faced with ceramic elements, painted with special enamels, or out of plastic or rubber. It is not recommended to be used in swimming pools reinforced with concrete.

It can also be used for the cleaning of the metal elements of the swimming pool (stairs, barriers, etc) because it does not corrode the metal elements out of stainless steel. It is not recommended for aluminium elements.

It is biologically biodegradable.


USE FIELDS
  • It is used immediately after the swimming pool has been emptied so that the surface be wetted. If it is to be used on dry surfaces, the surface will be wetted by plenty of water.
  • If there are traces of oils, fats and vegetal or animal proteins, the product DEGREASER - is used first in order to remove them.
  • A 10÷30% solution is prepared for use (1÷3 liters to 7÷9 liters of water which is homogenized well).
  • For cleaning, a normal brush is soaked in the product, then it is applied on the walls and on the bottom of the swimming pool. In the areas with large or resistant stains the surface will be scrubbed.
  • After cleaning, the walls and the bottom of the pool will be washed with water jet with the emptying pump in operation in order to evacuate the water to the sewage system.
  • If there are still stains, it is recommended to repeat the cleaning process.
  • The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.


PH - MINUS - Edirom Pool

 
PRESENTATION

pH - MINUS - is an acid product in liquid form, based on active components with the purpose to reduce, to lower the pH value in the water of the swimming pools.

USE FIELDS

pH - MINUS - adjusts the pH of the water when it exceeds the upper value of 7.4 of the best range, namely it reduces it.

The water which supplies the swimming pool is usually from the public network or from drilled wells, which can have a pH that does not comply to the best range of 7.0÷7.4. If, after the verification of the water pH by means of a tester, its value is higher than 7.4, a product metering will be done.

At the same time, during the use of the swimming pool, the value of the pH of the water can increase because of the addition water, of the treatment of the pool with other substances, especially during chlorination, or of the rain water. For this purpose, the pH is adjusted in order to keep it within the best range by adding pH - MINUS - .

The correct metering will maintain the best features of the water and it will not influence the people or the pool itself.

It is a biologically biodegradable product.

USE FIELDS
  • The product will not be diluted, it is used as such.
  • Do not combine it with other products!
  • For the modern swimming pools, endowed with an automatic system of pH control and metering of the treatment, pH - MINUS - is introduced into the metering vessel or the suction hose of the metering pump is introduced into the container with the product. The metering of the product is done automatically, both during the filling of the swimming pool and during its use.
  • For the swimming pools which do not have pH adjustment, the pH is verified during the filling and weekly by means of a tester and it is adjusted. The pH adjustment is also done when an additional quantity of completion water is introduced. If after the verification of the pH of the water with a tester, its amount is higher than 7.4, a product metering will be done with pH - MINUS - , added in several points, waiting until the water is homogenized by recirculation.
  • Metering: In order to reduce the pH value in the water by 0.1 1÷1,5kg pH - MINUS - will be added to 100 m3 water (100÷150g/10 m3 water).
  • The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.


PH - PLUS - Edirom Pool

 
PRESENTATION

pH - PLUS - is an alkaline product in liquid form based on active components with the purpose to reduce, to lower the pH value in the water of the swimming pools.


USE FIELDS

pH - PLUS - adjusts the pH of the water when it drops below the lower value of 7.0 of the best range, namely it increases it.

The water which supplies the swimming pool is usually from the public network or from drilled wells, which can have a pH that does not comply to the best range of 7.0÷7.4. If, after the verification of the water pH by means of a tester, its value is lower than 7.0, a product metering will be done.

At the same time, during the use of the swimming pool, the pH value of the water can decrease because of the addition water, of the treatment of the pool with other products or of the rain water. For this purpose, the pH is adjusted in order to keep it within the best range (7÷7.4) by adding pH - PLUS - .

The correct metering will maintain the best features of the water and it will not influence the people or the pool itself.

It is a biologically biodegradable product.

USE FIELDS
  • The product will not be diluted, it is used as such.
  • Do not combine it with other products!
  • For the modern swimming pools, endowed with an automatic system of pH control and metering of the treatment, pH - PLUS - is introduced into the metering vessel or the suction hose of the metering pump is introduced into the container with the product. The metering of the product is done automatically, both during the filling of the swimming pool and during its use.
  • For the swimming pools which do not have pH adjustment, the pH is verified during the filling and weekly by means of a tester and it is adjusted. The pH adjustment is also done when an additional quantity of completion water is introduced. If after the verification of the pH of the water with a tester, its amount is lower than 7.4, a product metering will be done with pH - PLUS - , added in several points, waiting that the water is homogenized by recirculation.
  • Metering: In order to reduce the pH value in the water by 0.1 1÷1,5 kg pH - PLUS -  will be added to 100 m³ water (100÷150g/10 m3 water).
  • The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.


ANTIALGE - Edirom Pool

 
PRESENTATION

ANTIALGAE - is a synergic mixture in liquid form based on active components with the purpose to destroy the microbiological growth (bacteria, viruses, fungi, algae etc) which are formed in the water of the swimming pool.

USE FIELDS

ANTIALGAE -  destroys quickly and efficiently the microbiological forms (bacteria, viruses, fungi, algae, etc) from the water of the swimming pools and provides clean, healthy water.

Because the water of the swimming pool remains a long time in the open, exposed to very many contaminations, and because the charging with organic and microbiological material from the supply water and during the operation, in the pool water many microorganisms develop (bacteria, viruses, fungi, algae etc) which give an unpleasant aspect of the water by a greenish colour and turbidity, unpleasant smells can appear and possible risk of illnesses can occur for the people who use the swimming pool. For this, the chlorination treatments and those with active oxygen are used, which keep the organic charging and the microbiological developments under control, but, due to the contaminations, they spread quickly, thus they require treatments with special products to destroy the built up microbiology. .

It is used for the cleaning and disinfection of the pool surface (walls and bottom) after the emptying of the swimming pool and the degreasing and the decrustation of the surfaces. It is used for the treatment of the pool water, during its filling, during its use, a weekly shock dose, and during the period when the pool is not used. The treatment of the water is done after the adjustment of the pH to reach the range 7.0÷7.4 with or pH-plus - and it is done by shock treatments of disinfection of the water using CHLOR - ,ANTIALGAE - and then with OXYGENE ACTIVE - ,followed by the clarification of the water with FLOCULANT - and suction of the impurities.

It is recommended for all the types of swimming pools.

It is biologically biodegradable.

USE INSTRUCTIONS
  • For the disinfection of the surface of the swimming pool (walls and bottom), immediately after the pool has been emptied ,, if required, first of all the surface is degreased, then it is decrusted and it is rinsed well. If it will be used on dry surfaces, the surface will be wetted by plenty of water. The disinfection of the surface of the swimming pool is done by mopping up with a 1÷2% solution ANTIALGAE -  (100÷200 g ANTIALGAE - to 10 liters water). The application can be done by means of a brush or a cleaning mop, following that the surface be well wetted. It is left to react for 1÷3 hours, then it is rinsed well with water jet and the water is evacuated.
  • The required quantity of ANTIALGAE - is calculated according to the quantity of water in the swimming pool. The recommended doses are the following:
  •  When filling the swimming pool with water - 20÷40 ml ANTIALGAE - / m 3 water (2÷4 liters ANTIALGAE - to 100 m3 water).
  •  During the period when the swimming pool is being used, a weekly shock dose - 10÷20 ml ANTIALGAE - / m3 water (1÷2 liters ANTIALGAE - to 100 m3 water). Because of the use conditions of the pool or if external contaminations occur (rain, wind), the treatments can be done more often.
  •  If during the use of the swimming pool, large microbiological growth occurred, a shock dose of strong biocidation will be done - 40÷50 ml ANTIALGAE - / m3 water (4÷5 liters ANTIALGAE - to 100 m3 water).
  •  For the holidays, if you are going to leave home more than 8 days - 20 ml ANTIALGAE - / / m3 water (2 liters ANTIALGAE - to 100 m3 water).
  •  During wintertime, without draining (evacuating) the water from the swimming pool - min. 40 ml ANTIALGAE - / m3 water (4 liters ANTIALGAE - to 100 m3 water).
  • The quantity of ANTIALGAE - can be increased according to the individual conditions of each pool and to the microbiological charge.
  • Do not combine it with other products!
  • The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.
  • For the other products in the shock treatment, the recommended doses are specified for each product.

CHLOR - Edirom Pool

 
PRESENTATION

CHLOR - is a liquid mixture based on components which contain available chlorine with the role of chlorination of the water for disinfection and removal of the organic substances in the swimming pool water.


USE FIELDS

CHLOR - provides the best chlorine content in the water of the swimming pool which ensures the disinfection of the water, quickly and efficiently, together with ANTIALGAE - and OXYGENE ACTIVE - , as well as the removal of the organic impurities by their oxidation ("burning") in the water of the swimming pool, thus eliminating the food for micro-organisms and the unpleasant smells of the water.

It is used only after the pH has been adjusted to reach the range 7.0÷7.4 with pH-minus - or pH-plus - .

The best way to use the product CHLOR - is by means of an automatic metering system which maintains the value of the chlorine to 1÷2 mg/liter by continuous metering. During the filling of the pool and while it is not used (holidays or during wintertime), shock treatments for water disinfection are done by using CHLOR - , ANTIALGAE - and then with OXYGENE ACTIVE - ,followed by the clarification of the water with FLOCULANT - and suction of the impurities. Shock treatments are also done weekly in the case of the swimming pools which do not have an automatic metering system.

It is recommended for all the types of swimming pools.

USE INSTRUCTIONS
  • When an automatic metering system is used, it will be adjusted to keep the value of the chlorine to 1÷2 mg/liter and a continuous metering of the product CHLOR - , is done, the consumption being of 3÷5 ml/ m3 water daily.
  • In the case of the shock treatments, the required quantity of CHLOR - is calculated according to the water quantity in the swimming pool. The recommended doses are the following:
  •  When filling the swimming pool with water - 10÷20 ml CHLOR - / m3 water (1÷2 liters CHLOR - to 100 m3 water).
  •  During the period when the swimming pool is being used, a weekly shock dose - 10÷20 ml CHLOR - / m3 water (1÷2 liters CHLOR - to 100 m3 water). Because of the use conditions of the pool or if external contaminations occur (rain, wind), the treatments can be done more often.
  •  If during the use of the swimming pool, large contaminations have occurred, a strong shock dose will be done - 30 ml CHLOR - / m3 water (3 liters CHLOR - to 100 m3 water).
  •  For the holidays, if you are going to leave home more than 8 days - 30 ml CHLOR - / m3 water (3 liters CHLOR - to 100 m3 water).
  •  During wintertime, without draining (evacuating) the water from the swimming pool - min. 40 ml CHLOR - / m3 water (4 liters CHLOR - to 100 m3 water).
  • The quantity of CHLOR - be increased according to the individual conditions of each pool and to the microbiological charge.
  • Do not combine it with other products!
  • The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.
  • For the other products in the shock treatment, the recommended doses are specified for each product.

OXYGENE ACTIVE - Edirom Pool

 
PRESENTATION

OXYGENE ACTIVE - is a liquid mixture based on active oxygen and other components with a role of quick oxidation of the impurities and clarification of the water in the swimming pool having as a result a clear water. It has also a role of biocide, by destroying the built-up microbiology.

It is compatible with all the types of treatment, it acts quickly and it decomposes without residues.

USE FIELDS

OXYGENE ACTIVE - is used in shock treatments of water disinfection after the chlorination with CHLOR - and biocidation withANTIALGAE - for clearing the water by the quick and efficient oxidation of the impurities and the decolouration of the water, from greenish to clear, followed by the cleaning of the water with FLOCULANT - and the suction of the impurities. . OXYGENE ACTIVE - , can be used also alone, when the water in the swimming pool has coloured itself and contaminations have occurred, ensuring quickly their destruction and the clearing of the water.

It is used for the treatment of the water of the swimming pool, during its filling and during its use. The water treatment is done after the pH has been adjusted to reach in the range 7.0÷7.4 with pH-minus - or pH-plus - and it is done by shock treatments of water disinfection using CHLOR - ,ANTIALGAE - and then with OXYGENE ACTIVE - ,followed by the cleaning and the clarification of the water with FLOCULANT - and the filtration or suction of the impurities.

It is recommended for all the types of swimming pools.

It is biologically biodegradable.

USE INSTRUCTIONS
  • The introduction of the product OXYGENE ACTIVE - into the swimming pool water is done in several points and it will be waited for the homogenization by recirculation and clarification. If the water has not clarified, additional quantities are added.
  • In the case of the shock treatments, the required quantity of OXYGENE ACTIVE - is calculated according to the water quantity in the swimming pool. The recommended doses are the following:
  •  When filling the swimming pool with water - 20 ml OXYGENE ACTIVE - / m3 water (2 liters OXYGENE ACTIVE - to 100 m3 water).
  •  During the period when the swimming pool is being used - 10÷20 ml OXYGENE ACTIVE - / m3 water (1÷2 liters OXYGENE ACTIVE - to 100 m3 water). Because of the use conditions of the pool or if external contaminations occur (rain, wind), the treatments can be done more often.
  • f during the use of the swimming pool, large contaminations have occurred, a strong shock dose will be done - 30 ml OXYGENE ACTIVE - / m3 water (3 liters OXYGENE ACTIVE - to 100 m3 water).
  • The quantity of OXYGENE ACTIVE - can be increased according to the individual conditions of each pool.
  • Do not combine it with other products!
  • he handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.
  • For the other products in the shock treatment, the recommended doses are specified for each product.

FLOCULANT - Edirom Pool

 
PRESENTATION

FLOCULANT - is a liquid mixture based on active components with role of joining the impurities of small dimensions and their reunion in bigger particles which deposit as floccules on the bottom of the swimming pool; thus they can be retained by the sand filters or sucked up by means of mechanical or manual vacuum cleaners, eliminating the turbidity of the water and clarifying the pool water, having as a result a clear water.

It is compatible with all the types of treatment, it acts quickly and it decomposes without residues.

USE FIELDS

FLOCULANT - is used in shock treatments of water disinfection after the chlorination with CHLOR - , biocidation with ANTIALGAE -  and clarification of the water with OXYGENE ACTIVE - To clean the water, FLOCULANT - is added, followed by the filtration of the water or suction of the impurities.

It is used for the treatment of the swimming pool water, during its filling and during its use. The treatment of the water is done after pH adjustment to reach the range 7.0÷7.4 with pH-minus - or pH-plus - and it is done by shock treatments of water disinfection using CHLOR - ,ANTIALGAE - and then with OXYGENE ACTIVE - ,followed by the clarification of the water with FLOCULANT - and suction of the impurities.

It is recommended for all the types of swimming pools.


USE INSTRUCTIONS
  1. The introduction of the product FLOCULANT - into the swimming pool water is done at the end of the day, when there is a short period when the pool is not used. To reach the best results, use the skimmer for metering. Pour slowly the product FLOCULANT - îinto the skimmer while the recirculation and filtration system is on. After having poured the product, stop the system for about 1÷2 hours to let it react. Start the recirculation and filtration system and wait until the water clarifies or until the backwash (filter washing) is needed.
  2. At the swimming pools that are not endowed with a skimmer, the introduction of the product FLOCULANT - is done by a compensation tank or after it was diluted with water in a bigger tank in a ratio of 1:5. The introduction is done in several points and the water is homogenized by recirculation or agitation. It is left for 12÷24 hours to react, then the impurities concentrated and deposited as floccules or sludge are sucked up from the bottom of the pool.
  3. The required quantity of FLOCULANT - calculated according to the water quantity in the swimming pool. The recommended dose is 10÷30 ml FLOCULANT - / m3 water (1 ÷3 liters FLOCULANT - to 100 m3 water).
  4. For the outside swimming pools, with dust deposits from the air, which are endowed with an automatic filtration system, 3÷5 ml FLOCULANT - / m3 water can be introduced daily (0,3 ÷0,5 liters FLOCULANT - to 100 m3 water).
  5. The quantity of FLOCULANT - can be increased according to the individual conditions for each swimming pool.
  6. Do not combine it with other products!
  7. The handling and the use of the product will be done carefully, the personnel will wear plastic gloves, type household use, in good condition.
  8. For the other products in the shock treatment, the recommended doses are specified for each product.

EDICHIM S.R.L. GĂEŞTI
No. 23B, Nicolae Titulescu Str.
GĂEŞTI, Dâmbovita county
office@edichim.com
tel. no. 0245 713 365
      0245 710 721
      0371 088 666
fax no. 0245 713 357
       0245 713 365

Newsletter
Get information about EDICHIM'S products and promotions